$95.00
This early club is stamped on the back "AUCHTERLONIE - SPECIAL". The replaced lambskin grip is in fine condition, and the hickory shaft sports a nice aged patina. It measures 38 inches from heel to top of shaft and is likely a MASHIE although it is not marked as such. There are various small dings, modest pitting to the metal surface and examples of wear commensurate with this club's use and 110+ years of age.
A very desirable Scottish golf club!
$15.00
Extensively used in the 19th century and earlier, the cupping glass is a glass vessel from which the air has been exhausted by heat or suction creating a vacuum, and then applied to the skin to draw blood to the surface for therapeutic or curative purposes.
$250.00
The unique features of this club are (1) - only 1/2 of the face has deep grooves, and (2) - the grooves are ground at an acute angle which is quite unlike any I have yet to see documented. The more common deep groove examples have grooves throughout the face, with the grooves parallel to the sole.
The back of the club is stamped as follows: George Sargent - CHEVY CHASE (a Maryland suburb of Washington, DC).
The club measures 36.5 inches from heel to the top of the shaft. The leather grip appears to be original and is in good condition. The hickory shaft is slightly bent. The head of the club shows modest and honorable wear, and good grooves with generalized pitting to the surface.
Deep groove clubs were designed to significantly enhance the backspin of a golf ball, causing it to stop quickly. As history would have it, these clubs actually worked quite well and provided an unfair advantage to those professionals who were adept at using them (esp. Jock Hutchison)!
In 1922, DEEP GROOVED GOLF CLUBS were banned just after the OPEN CHAMPIONSHIP by the R&A (Royal & Ancient- the UK's much older version of the USGA), and later by the USGA. Of interest, this club was imported from the UK and was still being offered for sale 6 years after the ban. The club was, perhaps, a special order/experimental design commissioned by George Sargent. Certainly, a very unique example of an early club design sporting a colorful history!
For more details, search DEEP GROOVE GOLF CLUB - JOCK HUTCHISON - RIBBED GOLF CLUB.
A brief biography:
George Sargent was born in England in 1882. He began his career path rather early, beginning as an apprentice golf club maker by the young age of 12. After 3 years of training, George's path gradually progressed into playing professional golf, and by the age of 19, George was playing professionally full-time. He eventually moved to Canada, becoming a club pro. By 1909, George successfully won the US OPEN and continued his career in the US. He was head pro at various prodigious country clubs including EAST LAKE in Atlanta, designed numerous courses, and is credited with introducing the use of motion pictures to study the golf swing. He served as the president of the PGA for 5 years, and was inducted into the PGA hall of fame.
$65.00
This dual purpose pharmacy tool of the trade measures about 9 inches high and retains much of its original black japanned surface.
$45.00
As noted on the bag, THE GIPSY COMPOUND CONDITION POWDERS were an all-purpose CURE invented by C.H. PROCTOR, of 13 Brown Street, Marlboro, Massachusetts. While the marketing description was specific to horses, the powders were additionally advertised as suitable for use with cattle, poultry, and swine as well! Truly an all-encompassing cure-all!
The paper bag has rich toning commensurate with its 120+ years of age and is in fine condition. Please note that the 3rd photo best demonstrates the actual color and toning. This bag is "new old stock" and was never unused. Measuring 15 inches high x 10 inches wide, this vintage piece would look absolutely phenomenal framed!
$195.00
The back of the club is stamped as follows: "PREMIER", "HA", "J.JOLLY" (probably owner) - BAKSPIN (with arrow - a Macgregor identifier) and MASHIE.
In 1921, RIBBED GOLF CLUBS also known as Deadstop Irons were banned by the R&A and USGA just after the OPEN CHAMPIONSHIP won by Jock Hutchison who had used these clubs.
Measures 36 inches from heel to top of shaft. The leather grip appears to be original and is in good condition. The hickory shaft is straight and is sturdy. The head shows minimal wear, and is my best example being offered. A showcase collectible!
For more details search DEEP GROOVE GOLF CLUB - JOCK HUTCHISON - RIBBED GOLF CLUB.
$45.00
Each pull measures approximately 1.4"W x 1.3"H x 1" front to back (not including bolt). (Please note- "INULA HELEN" is sold.)
The condition of the pulls is very good with only a few minor manufacturing imperfections that add to the desired patina of an antique of this age and period. The decorative gold embellishments painted above and below the medicinal labeling of each pull show moderate loss, primarily "use-wear", due to decades of continual handling over their 140+ years of age. Please note that the "TEREBINT" pull has a rear chip as noted in the individual, close-up photo.
The pulls each sport the following maker's mark on the bottom of the knob: "PAT. FEB 12, 89 - M.D.B. CO. - ST. LOUIS, MO", although on some of the pulls, this marking has been illegibly applied.
Ready for display in your apothecary collection or for retro-chic decorating use on an actual cabinet, be it antique or contemporary!
$135.00
The 1st smooth face club is stamped on the back "R.B.WILSON - OK SPECIAL - MADE IN SCOTLAND". The lambskin grip is in good condition, and the hickory shaft sports a nice aged patina. It measures 38.5 inches from heel to top of shaft and is likely a MASHIE although it is not marked as such. There are various small dings, faint pitting to the metal surface and examples of wear commensurate with this club's use and 110+ years of age.
The 2nd club is marked "MORRISTOWN" on back and is very nice with minimal signs of use. There is a "sheen" seen in the sweet spot that is of unknown origin. Of note: Spalding produced a line of clubs marked 'Morristown', so this club may well be one of their earlier examples as there are no other maker marks present...an excellent club, indeed!
$35.00
The condition is very good with only signs of mild wear commensurate of a modestly used tool of the trade. No damage or loss, just scruffs and a nice surface patina.
Measures about 10.5 inches long and ready for your collection or use. The #7 is stamped into the edge of porcelain.
$165.00
1) A C1870, American, very appealing, rather primitive IRON SQUARE measuring 24 inches in length on the long side and 12 inches in length on the shorter side. This solid tool shows the worn appearance of a well-used tool with moderate pitting and loss yet still displays its hand-stenciled numerals and measurement points.
2) A C1870, English, impressively-constructed MORTISING CHISEL that is in very good, usable condition. The durable hand-wrought, hardwood handle supports a hearty steel chisel that is stamped, "WR BUTCHER", along with the image of the English crown. English tools are well-noted to be of high caliber construction. This 9.5 inch long has a lovely, warm patina with a slight, 1 inch hairline where the handle joins the metal.
3 & 4) Two, mid-19th century, Pennsylvanian, iron, BENCH HOOKS. This hand-wrought pair sports a twisted iron design and measure 6 and 10 inches in length, respectively.
5) A C1860, American, elegantly formed WOODWORKER’S OPEN SCORP designed to shave away thin slices of wood. This handsome, 17 inch long tool beckons the skilled craftsman’s and designer’s eye, as it is in working condition and sports a lovely, rich patina. A 2 inch long split near the steel does not impact the integrity of the tool or its workable strength.
6) This circa late 19th century, American, 3 inch diminutive bicycle WRENCH retains most of its chrome plating and shows minimal wear. Made by Mossberg Co. of Attleboro, MA., this "Junior No.1" embossed tool is fully functional as it easily opens and closes.
7) A late 19th century/early 20th century, handsomely-shaped, brass and steel, PLUMB BOB measures 4 inches tall, sporting a nice patina and is ready to use. This American piece is embossed "GENERAL HARDWARE MFG CO, NY, NY, USA”, and shows minimal wear.
8) A high-quality, delightfully-designed, American steel, CALIPER made by the Starrett Co., sports a patent date of June 2, 1895, measures 4.75 inches long and remains usable.
9)This cute, 4 inch long, hardwood-handled GIMLET is in very good condition, dates to the 19th century and also remains usable if chosen. The tip terminates in a tiny screw shape to help initiate the boring of holes for screws.
10)The final tool of this grouping is a very lovely, 19th century, steel and brass, adjustable, COMPASS with plenty of life left. It is marked "P.S. & W Co.", measures 6.25 inches long, and is in very good condition.
$105.00
This club measures 36.25 inches from the heel to the end of the shaft. It is stamped 'MASHIE NIBLICK' on the sole and notes a 'FLYING CROW' cleek mark and 'SPALDING' etc. on the back. The face sports a DEEP GROOVE pattern and a darkened patina. The grip is an old replacement and the sturdy hickory shaft is straight with slight loss at the hosel end. The clubhead shows mild wear with the expected scratches, scuffs of an antique club. A nice seldom-found Spalding Bros. deep groove golf club!
SOME HISTORY
"A.G. SPALDING BROS. began its golf club manufacturing in 1892, first in the USA and then in Britain shortly thereafter. In 1905, they introduced their popular "GOLD MEDAL" model and continued this successful line until 1919. The Kro - Flite example was first manufactured in the 1920's and eventually became one of Spalding's most popular models. They have been a major innovator / manufacturer in golf and other sports equipment for many years.
$165.00
The back of the club is stamped as follows: WONT-RUST 9-R ACCURATE - BAKSPIN (with arrow) MASHIE-NIBLICK and an oval stamp with MACGREGOR, DAYTON OH.
In 1921, RIBBED GOLF CLUBS were banned by the R&A and USGA just after the OPEN CHAMPIONSHIP.
Measures 35.5 inches from heel to top of shaft. The leather grip appears to be original and is in good condition. The hickory shaft is straight, sturdy, and has the following stamping near the grip: THE CRAWFORD MACGREGOR & CAMBY CO. DAYTON, OHIO. The head of the club shows moderate and honorable wear, worn grooves with a good surface.
A nice example of an early club with a controversial history.
For more details search DEEP GROOVE GOLF CLUB - JOCK HUTCHISON - RIBBED GOLF CLUB
$45.00
First is a choice, five inch, wooden-cased hand-blown glass syringe that appears unused and is in excellent condition. The plunger glides smoothly and the syringe fits snugly inside the treen case.
Second is a 6 inch example that appears lightly used. The plunger is in fine, perfect condition; however,it seems to be stuck inside the syringe, and I have chosen not to try to move it.
An additional, third syringe included in this grouping is missing its tube, but is otherwise in good condition.
$195.00
Pill machines were designed to enhance the productivity of the early pharmacist, and this design was, indeed, popular for many, many years. This pill machine is designed with 24 tubes for medicine-making.
The condition is very good, sporting a nice patina commensurate with its age and use. It is constructed of walnut and embellished with brass edge guards as well as brass grooved molds. The base measures approximately 11.5" L x 7" W x 1.5" H including the footed base. The paddle is 15.25"L x 2.25"W.
An apothecary classic, ready for your collection!
$95.00
The first tool is a diminutive hammer which was probably used to drive small nails and tacks. The handle measures 8.5 inches long and sports a shapely head made of iron. This hand wrought primitive tool has a nice original patina and shows wear commensurate with age.
The second tool is called a RACE KNIFE which was a tool of the carpenter, cooper, lumberman and shipwright. The hooked blade scored timbers, staves, or logs with identification marks. This hand tool measures 6 inches long and has 2 cutting blades, one of which closes into the handle like a penknife. The metal component is hand-forged and is affixed to the wooden handle. The condition is very good, with a few ancient hairline splits noted to the handle. The metal has the expected minor pitting and wear of an early tool.
This pair of early tools-of-the-trade would make a great addition to your collection or display!
$55.00
It will be hard task to find bottles with labels in this fine condition.
A lovely trio not to be missed!
$540.00
Each pull measures about 2"W x 1 3/4"H x 1 1/2" front to back (not including bolt).
The condition of the pulls is very good with only a few minor manufacturing imperfections that add to the desired patina of an antique of this age and period.
Most of the pulls sport the following, sometimes illegible, maker's mark on the bottom of the knob: "PAT. FEB 12, 89 - M.D.B. CO. - ST. LOUIS, MO".
The pulls are priced at $540 for the matching set of twelve or can be purchased individually at $45.00 PER PULL. Ready for display in your apothecary collection or for retro-chic decorating use on an actual cabinet, be it antique or contemporary!
$35.00
SOME HISTORY:
H&B operated as a carpentry business starting in 1855 by J.F. Hillerich. In the mid 1880s, his son expanded the business into making bats for a local semi-pro baseball team which were an instant hit with the players. In 1894, they were labeled the "LOUISVILLE SLUGGER", and in 1905, HONUS WAGNER signed an endorsing contract attesting to their quality. Salesman, Frank Bradsby, became a partner in 1916, and the company was renamed "The Hillerich and Bradsby Co". This same year, the company started making golf clubs. By 1923, TY COBB, BABE RUTH and Lou GEHRIG all used their bats!