Catalog: Antiques: Instruments and Implements (106)

Offered is a skillfully hand-crafted, Civil War era, soldiers' crutch constructed entirely of wood.

The crutch measures approximately 46.5 inches in length x 8 inches wide at the arm support. The pole section or the leg of the crutch is about 43 inches long x 1.25 inches wide x 1 inch deep in dimension. It sports bench-made, skilled joinery as evidenced by the wooden pinned mortise and tenon joint. The bottom tip reveals a few worn nails embedded into it, likely to help reduce wear. The finish shows an all-original, warm patina as typically seen in other early wooden objects of similar age.

Overall, there is evidence of mild wear and tear, and the arm support joint is slightly loose- all commensurate with an antique object designed for this purpose and of this era.

A fine early medical example to add to your collection.

Please also see the RARE Civil War Field Surgical / Mortuary Gleasons Table offered for sale.

Offered is a fine, all-original, aluminum, golf mallet putter from the Dave Cuthbert shop of St. Andrews Scotland.

This well balanced and sleek appearing club sports a straight hickory shaft and a nice leather grip. Deep checkering lines adorn the face and a well struck "D. CUTHBERT - SPECIAL" stamp is seen on the top.

The condition is very good with the expected small dings, scratches and wear of a club that is over 100 years old. The club measures 34 inches from the sole to the end of the club.

SOME HISTORY

David Scott “Dave” Cuthbert was born in St. Andrews, Scotland in 1885. He got his start in golf as a caddy at St. Andrews Golf Club, and as a young man, he worked in Old Tom Morris’ golf shop. He often caddied for Freddie Tait who was one of the greatest amateurs in Great Britain. In 1912, Cuthbert learned from a friend who had worked in America that Huntingdon Valley Country Club was looking for a golf professional, so he set sail at once. He arrived in Philadelphia during a March blizzard with his golf clubs and a suitcase. He then proceeded to seek out the Huntingdon Valley green chairman. Without an appointment he announced that he was David Cuthbert of St. Andrews and he had come all the way from Scotland for the position of golf professional. He was hired and stayed seven years. He relocated to Canada for four years and returned to PA when Ashbourne Country Club opened in 1923. Cuthbert was Ashbourne’s first golf pro, and he remained there for fifteen years. In the club's opening year, 1923, Cuthbert finished second by one stroke in the 1923 Pennsylvania Open.

Offered are two desirable, circa 1905-1910, smooth face hickory shaft golf clubs. Smooth face golf clubs fell out of fashion, and perhaps function, by the very early 1900s, yet they were still offered in catalogues for a number of years beyond this date.

The 1st smooth face club is stamped on the back "R.B.WILSON - OK SPECIAL - MADE IN SCOTLAND". The lambskin grip is in good condition, and the hickory shaft sports a nice aged patina. It measures 38.5 inches from heel to top of shaft and is likely a MASHIE although it is not marked as such. There are various small dings, faint pitting to the metal surface and examples of wear commensurate with this club's use and 110+ years of age.

The 2nd club is marked "MORRISTOWN" on back and is very nice with minimal signs of use. There is a "sheen" seen in the sweet spot that is of unknown origin. Of note: Spalding produced a line of clubs marked 'Morristown', so this club may well be one of their earlier examples as there are no other maker marks present...an excellent club, indeed!

Offered are three C1905-1930, hickory shaft golf clubs from Edinburgh, Scotland.

The first club, a ladies' MASHIE iron, is stamped with the following: "HENDRY & BISHOP Ltd. - EDINBURGH - Made in Scotland - Warrented Hand Forged - SPECIAL (L) with the MITRE BRAND" cleek mark. This circa 1930 club has a handsome construction and measures 35 inches to the heel. The straight hickory shaft sports a nice patina, and its original leather grip is in good condition. The club head is in good condition with mild leading edge dings and sports dot face stamping.

The second club, a circa 1905 JIGGER, is in very good overall condition sporting a solid, straight hickory shaft with an original patina. The club head sports a random sized dot-punched style on the face. The back is stamped with the following: "HAND FORGED IN SCOTLAND and M.J. BRADY - SPECIAL" in an oval. T.S.St.A plus REGISTERED TRADEMARK and a PIPE" cleek mark. (T.S.St.A stands for TOM STEWART-ST ANDREWS.) A JIGGER is a short-shafted club with low loft which was used in the same way as the modern chipper. The club has minimal dings and wear to the head. A high quality, low profile specialty club! A very nice example indeed!

The third club is a fine example of a circa 1900 crafted, low profile and low lofted driving iron or mashie. The leather grip has been professionally replaced, and the straight hickory shaft sports an original patina. The club measures 37 inches to the heel. There is deep nicking to the hosel and a slight wiggle where the shaft joins. The face has a ding by the toe end, perhaps the result of an honorable blow that caught both ball and stone many years ago. The back is stamped with the following: "SCCMCoy LTD - ED......." (? Edinburgh).

A nice trio of Scottish clubs!

Made, warranted and patented in 1863 by Charles Emerson of Charlestown (a suburb of Boston), Massachusetts, this all original razor strap miraculously retains its original cardboard sheath.

The historically-fascinating sheath label is in exquisite condition with minor edge wear noted to the sheath. The strap shows evidence of use and also remains in fine condition.

The 9.35 inch long strap was advertised for use in sharpening not only shaving razors, but also pen knives and surgical instruments!

A rare piece of early Barber Shop Memorabilia!

Two circa 1915, aluminum, mallet head putters with hickory shafts are offered for your consideration. Both clubs are marked on the top with the following info: "STANDARD GOLF CO. - Mills Patent - Sunderland".

Club #1 has the patent # 171795 and "ENGLAND" stamped on the top. The base is stamped "BRAID-MILLS 1915 MODEL UPRIGHT LIE 9ozs 15drs". The face has a checkered pattern, slightly curved shaft and good early leather grip. It measures 35.5 inches from the heel to the top of shaft. The condition is very good with a small piece of metal missing at the front of hosel.

Club #2 is stamped on top with the patent # of 137374. The bottom is generously stamped with the following: "J.P.B. (owner), BRAID-MILLS 1915 MODEL - MEDIUM LIE - 9ozs 15 drs - HARRY O. LEE & CO. NEW YORK" (Retailer). The face has a checkered pattern and the hickory shaft is straight, sporting a good leather grip. It measures about 34 inches from the heel to the end of the grip. Overall the condition is very good commensurate with a club over 100 years old.

Together they make a nice duo of playable clubs.

SOME HISTORY:
Sir William Mills began experimenting with aluminum golf club heads in the 1890s. Mills was a marine engineer and used his company, William Mills Ltd, to branch into the golf business, leading to the Standard Golf Co.

Offered are three, desirable, circa 1910-1920 era, smooth face, hickory shaft golf clubs. Although smooth face golf clubs fell out of fashion and perhaps function by the very early 1900s, they were still offered in catalogues for a number of years beyond this date.

The first club is stamped on the back "SPALDING - GOLD MEDAL" and measures 39.5" from the heel to the top of the shaft. The Gold Medal line was first introduced in 1905 and offered till 1919. The complete grip shows mild separation and is in good condition. The shaft on this long club (likely a #2 iron) has a modest bend near the grip.

The second club, a putter, is stamped on the upper shaft "THE CRAWFORD MACGREGOR & CAMBY CO - DAYTON, OH" and measures 32.5 inches from the top of the club to the heel. The sheepskin grip is worn and the face of the club is heavy by design.

The third club is likely a MASHIE, has a straight shaft and good grip. The name of the maker is not discernible due to a partially worn stamped label. It measures almost 36 inches from the end of the club to the heel.

All three clubs show various, small, leading edge dings, original patina and mild wear commensurate with the clubs' use and 110+ years of age. A delightful trio!

Measuring 3.25 inches high by 3.75 inches in diameter, this lovely Victorian Barber Shop, mustache or shaving cup or mug remains in excellent condition but for the subtle wear to the gilt-edged rim.

The cup is embossed with swirls, dots and bows as well as decorated further with gold-drawn designs and 2 large, hand-painted pink roses with 1 smaller cream-colored rose. The cup base is scalloped and the fancy handle is gold-gilded.

A very pretty piece!

Offered is an early portable Steelyard scale that is designed to weigh goods up to 30 pounds. This primitive iron scale sports hand-forging construction and measures just over 13 inches in length. The manufacturer's identifying name is almost fully readable and is stamped "?? WHITHFIELD & SONS".

The arm on one side is stamped in increments 1 through 9 (pounds) and 7-30 on the opposite side. Photo #5 shows two fancy and not often seen, "cross-shaped" embellishments.

The condition is very good with some mild wear, traces of rust, and faint pitting of the iron, all commensurate with an early tool of the trade.

An interesting and scarce example of early American craftsmanship.

Offered is a beautiful, circa 1895, Spalding Morristown model, Splice Neck Brassie Golf Club made in the Scotland.

This handsome club shows evidence of only light use with minimal wear noted to the face and sole. The clubhead was skillfully made from durable dogwood and is expertly spliced into the finest hickory shaft. The head sports a warm honey toned original finish. The sole is adorned with a brass plate which protects the horn at the leading edge of the face. The expertly replaced leather grip is covering the original listing. Two "MORRISTOWN" stamps are noted with the first at the top of the shaft and a second stamp which is faintly seen on the crown of the club head.

The club measures 40.5 inches long from the heel to the end of the shaft. A slight gradual bend is noted towards the lower quarter of the shaft. An eye catching early club!

Please note the photographed 1895 LIBRARY OF CONGRESS document from the SPALDING catalogue archives, confirming the origin and maker of MORRISTOWN golf clubs.

Offered is C1830's, hand-crafted, Woodworking Adjustable Plow Plane w/Bone Insert. This is a wonderful example of an early, unmarked, one-of-a-kind-constructed, woodworking tool with hand-hewn construction and repairs by a semi-skilled craftsman. Amazingly, this tool is approximately 200 years old!

Evidence of hand-craftmanship are scribe marks that extend beyond their desired point. The metal working skate is crudely riveted to the wood. Various early forged screws and nuts secure the sliding arms. To add to the charm of this early tool are two animal horn repairs to the fence, one of which is quite small and difficult to photograph.

The condition is commensurate with the honorable wear one would expect of an antique, utilitarian woodworking tool. The patina is wonderful with a smooth brownish finish, various scratches and dings, and mild wear. The blade and wedge do not exist.

This handsome, late 19th century leather case is a wonderful example of a physician's traveling medicine case of this era. This particular example is larger in size and number of sections than is typically found, and additionally sports the personalized label, "Dr W. J. Gier MD" in old, silver-toned lettering on the front of the folded case.

The vintage black leather case with carrying handle on top, measures approximately 10.5" wide x 32" long when fully opened and 10.5" wide x 5.5" long x 4" deep when closed. The case is comprised of four different folding sections that house up to 28 corked vials per section, with only one vial missing from this medicine case. The clear glass medicine vials come in 2 sizes and measure about 2 to 2.5 inches tall including cork, with most vials sporting both paper label and cork. There are a few bottles labeled in red print as opposed to black, which indicates that the contents are poisons. Included are one OPIUM vial and 3 POISON vials.

The condition of the case indicates that Dr. Gier must have had a busy and lucrative practice as the case shows modest wear and tear to the leather components: loose seams, some leather loss in areas, partially detached flaps, one completely detached flap- all of which are commensurate with age and use. Some of the vial labels are also incomplete as noted in the photos.

In total, a fabulous example of the retinue of medicines that the late 19th century physician had on hand when making house calls.

Offered is an extremely scarce, C1860s, United Kingdom Maker, Long Nose, Long Spoon, Wood Golf Club with original finish! It measures a formidable 44 inches from the heel to the end of the shaft! What is most intriguing about this club is the modestly angled 6 inch club face which showcases the dramatic curve.

This club actually presents a number of qualities that indicate it may, in fact, be an example of pre-1860s craftsmanship: : LENGTH of the face is 6 inches. The DEPTH of the face is 1 1/8 inches max. The face is SMOOTH and CURVED, and the club head is shaped in the form of a TEARDROP. The club is UNMARKED. The neck is slightly thin at just over 3/4 inches--- all indicators of an early, pre-1860s club!

This amazing club sports most of its original varnish surface and is offered in "as found" condition. The darkening of the finish results in a wonderfully rich patina. The club displays an enchanting presence owing to the gently-sculpted angling of the face. The sole of the club is without the usual ram's horn which was the typical norm, making this particular club that much more intriguing and quite unusual!!! I have not been able to find reference to clubs that were made in this fashion. RARE!!!

The early golfer must have been quite robust and sturdy as this heavy club face is one that most folks today would have a difficult time keeping "square" at impact. Long spoon clubs were used off of grassy surfaces which accounts for the very nice condition of this beauty. Besides the unobtrusive, expected scuff marks on the sole, there is only one tiny, barely-noticeable chip on the leading edge of the club face at the sole, consistent with hitting something other than a grassy surface!

The lead on the back of the club has been partially removed to customize it for the golfer. The slightly warped hickory shaft is undamaged and sports a warm, honey-colored surface. The leather grip was expertly replaced many, many years ago and has signs of honorable wear.

The skills of the craftsman are most apparent when the club is viewed from the top. While unmarked, this club displays the form of the exceptional, highly-skilled, UK club makers of the 19th century. According to author and golf history expert, Jeffrey B. Ellis, unsigned, long-nosed golf clubs were the norm in the pre-1870 era.

This rare, antique, hand-wrought, golf club was recently acquired from the estate of a gentleman who had restored and collected golf clubs for 7 decades! His family, while settling his estate, remarked that he had "paid crazy prices for some of his collection!". This prized, rare club is certain to have been included in that category!

A phenomenal, rarely-found example of 19th century craftsmanship, and a tangible example of exemplary golfing history.

Offered for sale is a wonderful late 19th century, Victorian drugstore, medical advertising cup. This lovely porcelain mug has “CUDAHY’S REXOMA” printed on the lip. Beautifully hand painted pink roses and other lavender colored flowers adorn the cup on all surfaces.

The Cudahy meat packing industry dates back to the turn of the century. The Cudahy meat industry, with stockyards in Omaha, Chicago, Sioux City and Los Angeles produced the REX brand of fine beef and pork products. They also produced lard, soaps and patent medicine products such as Cudahy's Essence of Pepsin and Cudahy's Rexsoma that used the animal byproducts. The patent medicines were marketed as nutritional supplements for improved health.

This 3.5 inch tall undamaged beauty is in very good condition and very classy indeed!

A terrific image on a lovely cup that can be easily displayed anywhere in your collection.

Offered is a very lovely, antique, 12 tube Pharmacy Apothecary Suppository Mold, circa 1880. This example measures 9.5 inches long x 1.75 inches wide x 1 inch high and weighs more than 4 pounds. I believe it is made of bronze and is plated in a nickel finish.

This very durable mold has 2 wing nuts on the base that hinge downwards to facilitate opening. To close, the nuts swing upwards and are locked by screwing in place.

The only markings noted are the numbers '1' and '2' stamped on the end of each plate.

The condition is as follows: scattered small surface dings and modest dings to the edges as seen in the photos. The surface shows scratches and some loss of plating commensurate with age and an honorably-used pharmacy device. The interior surface is similar to the exterior. Overall this antique mold is in very good condition!

Offered are two desirable antique mallet head aluminum putters sporting good grips, nice patina and hickory shafts.

The first club is a nice circa 1900 example from the shop of Peter Hendrie. It measures 33.5 inches from the heel to end of shaft and sports a dot pattern on the face. The straight hickory shaft and leather grip are in good condition. The top of the club is stamped "P. HENDRIE" and H.B. "BYERGASON" (club owner). The head of the club has the expected dings, scuffs and wear of an early club.

Club number two is stamped "MACGREGOR 3 1/2" on the top and sports a deep checkered pattern on the face. The solid straight hickory shaft and leather grip are in very good condition on this 30.5 inch club. It sports an original patina and handsome styling- both desirable features of this nice playable club.

SOME HISTORY:
Peter Hendrie was born in North Berwick, Scotland, in 1872, where he caddied as a boy before obtaining his first professional position at the York club in 1897. He returned to North Berwick in 1900 and worked as a clubmaker for a few years. In 1902, he emigrated to Canada with his wife and took up the professional’s post at the Victoria Golf and Country Club in Montréal.

He moved south to the United States in 1911, becoming the professional at the Fort Mitchell Country Club in Kentucky. He assumed various professional positions in the US until 1924 when he was appointed the first professional at the new Ulen Country Club in Lebanon, Indiana, where he remained until his retirement in 1946.

Offered is a very nice C1900, Fairbanks, NY, Drug Store or Apothecary Prescription Scientific Scale complete with weights. Features of the scale include a mahogany case sporting a wonderful patina, and the bone (or early plastic) name plate which is marked "FAIRBANKS NY", an iconic maker of quality scales of the period. A brass labeled NY (New York) CITY asset tag further enhances this vintage scientific collectible.

Additionally, a brass beam, column and dial create a visual enhancement. There are 2 nickel plated pans and a complete set of boxed weights that round off this appealing scale.

The scale case measures 9"L x 4.25"W x 2.5"H and is about 10" tall with the brass column in place.

The overall condition is very good with the expected scuffs, dings and imperfections commensurate of a 120+ year old antique. Minor tarnish prevails especially on the pans and on metal areas. The boxed weight set is in as found very good condition.

***NOTE*** THE SCALE WILL BE SHIPPED DISASSEMBLED for safe keeping during transit.***

A perfect compliment to one's apothecary - drug store collection!

Offered in this grouping are ten, 19th century, antique tools, seven of which represent the woodworking trade. Collectively, as displayed in the feature photo, these wonderful vintage pieces make a stunning wall display. For the advanced craftsman, these vintage tools remain completely functional and offer one that opportunity to step back in time and create using historic implements.

1) A C1870, American, very appealing, rather primitive IRON SQUARE measuring 24 inches in length on the long side and 12 inches in length on the shorter side. This solid tool shows the worn appearance of a well-used tool with moderate pitting and loss yet still displays its hand-stenciled numerals and measurement points.
2) A C1870, English, impressively-constructed MORTISING CHISEL that is in very good, usable condition. The durable hand-wrought, hardwood handle supports a hearty steel chisel that is stamped, "WR BUTCHER", along with the image of the English crown. English tools are well-noted to be of high caliber construction. This 9.5 inch long has a lovely, warm patina with a slight, 1 inch hairline where the handle joins the metal.
3 & 4) Two, mid-19th century, Pennsylvanian, iron, BENCH HOOKS. This hand-wrought pair sports a twisted iron design and measure 6 and 10 inches in length, respectively.
5) A C1860, American, elegantly formed WOODWORKER’S OPEN SCORP designed to shave away thin slices of wood. This handsome, 17 inch long tool beckons the skilled craftsman’s and designer’s eye, as it is in working condition and sports a lovely, rich patina. A 2 inch long split near the steel does not impact the integrity of the tool or its workable strength.
6) This circa late 19th century, American, 3 inch diminutive bicycle WRENCH retains most of its chrome plating and shows minimal wear. Made by Mossberg Co. of Attleboro, MA., this "Junior No.1" embossed tool is fully functional as it easily opens and closes.
7) A late 19th century/early 20th century, handsomely-shaped, brass and steel, PLUMB BOB measures 4 inches tall, sporting a nice patina and is ready to use. This American piece is embossed "GENERAL HARDWARE MFG CO, NY, NY, USA”, and shows minimal wear.
8) A high-quality, delightfully-designed, American steel, CALIPER made by the Starrett Co., sports a patent date of June 2, 1895, measures 4.75 inches long and remains usable.
9)This cute, 4 inch long, hardwood-handled GIMLET is in very good condition, dates to the 19th century and also remains usable if chosen. The tip terminates in a tiny screw shape to help initiate the boring of holes for screws.
10)The final tool of this grouping is a very lovely, 19th century, steel and brass, adjustable, COMPASS with plenty of life left. It is marked "P.S. & W Co.", measures 6.25 inches long, and is in very good condition.